Thermocouple Signal Transmitter 0-5v Type "K" 8 Channel Kit with Stinger Hyper Probes.
Just released by EGT our new Signal Converter takes any Type "K" Thermocouple(Ungrounded or Exposed Junction) and converts its signal to 0-5volt output.
The Kit Includes(8) WORLD FAMOUS "Stinger HYPER RESPONSE" EGT Probes w/ Mounting Hardware!
**Stinger EGT sensors have staggered wire length's for Big Block or Small Block Engines, exposed tip junction w/ Mild steel weld-on hardware.
***Enclosed Tip Sensors & Stainless Mounting Options are Available***
Converter Spec's:
- (8) Channels for Type "K" Thermocouple. (T/C's Included)
- Cold junction compensation.(uses any length wire)
- Recommended Input Voltage +14.5V to 36V DC.
- Output is 4mv/C / 0c = 0v to 1250C = 5.0v
- Temperature Range 0C - 1250C or 32F - 2282F
- Compact and easy to install w/ Velcro or Screw Mount
Most Dataloggers like AEM EMS, Greddy EManage, Motec, Stack, ACR, HRC, Many Dyno's & Industrial Applications have provisions for 0-5v inputs, this device solves the problem with interpreting the thermocouple's millivolt signal.
This Kit Includes:
- (1) Octo (8) Channel Thermocouple Convertor 0-5v
- (8)1/4" Stinger EGT Sensor's w/ Staggered Wire Lengths (2ea.length 9",13.75",18.50",23.25") w/ Mild Steel Weld-on mounting hardware.
- (2)Patch Cables 8.0" Length.
- (1) EGT to Convertor Box Termination Kit. (staggered leads & mini plugs only)
- (1) Install Instructions
**Optional EGT connections are available, "No Charge"
- Standard Stripped Leads (Standard)
- Staggered Leads w/ Ring Terminals (Optional)
- Mini Jack & Plug (Optional)
On the thermocouple side of any instrument it is important to use what they call a compensated connector this means that the connector has to be made of the same alloy's as the type used in the a type "K" thermocouple. Using any other alloy will cause the instruments reading to have an error.
To simplify the ordering process EGT has optional Type K connections. Please let us know which connector is desired at checkout.
If you have any questions feel free to contact EGT @1-800-348-4678 |
Contact
Us
EGT-0/5v-Octo Kit 
3 LBS.
