EGT-02R EVO Dual EGT data logger with RPM & Water temperature Standard Probes.
Continuing with the evolution of our dual EGT-02 meter, Koso is proud to offer the dual EGT-02R with RPM and Water Temperature. This meter allows you to tune the engine more precisely and prevent engine damages. The settable warning and maximum recall functions for both EGT, RPM and Water temperature are easy to use and show you vital engine information.
The color-changing backlight makes it very easy to see even at night. This cool instrument can save your engine from expensive repairs!
The settable warning for each cylinder gives you the opportunity to set a maximum temperature warning of up to 2,100 °F.
The red flashing of the screen makes it very easy to see if something is going wrong with the engine. This Gauge could save your motor!
Specifications (R= Range U=Unit)
- Digital EGT temperature A/B
R: 250 ~ 2,100 °F (100 ~ 1,200 °C)
U: 1 °F or °C (alternative)
- Over EGT temperature warning
R: 392 ~ 2,100 °F (200 ~ 1,200 °C)
U: 1 °F (°C)
- Max EGT temp. record
R: 250 ~ 2,100 °F (100 ~ 1,200 °C)
U: 1 °F (°C)
- Volt meter
R: DC 0.8 ~ 18 V | U: DC 0.1 V
- Volt meter warning
R: low voltage: DC 8.0 ~ 13.0 V
R: high voltage: DC 13.0 ~ 16.0 V
- RPM R: 0 ~ 15,000 RPM
- RPM input signal number setting
R: 0.5, 1 , 1.5, 2, 2.5, 3~ 24
- RPM input pulse
R: HI‑ACT (positive wave pulse)
LO‑ACT (negative wave pulse)
- RPM warning / shift‑light
R: 1,000 ~ 15,000 RPM | U: 100 RPM
- Max RPM record
R: 1,000 ~ 15,000 RPM
- Water temperature
32 ~ 482 °F (0 ~ 250 °C)
U: 1 °F or °C (alternative)
- Water temperature warning
R: 140 ~ 482 °F (60 ~ 250 °C)
- Max Water temperature record
R: 140 ~ 482 °F (60 ~ 250 °C)
- Backlight brightness
R: 1/5(Darkest) ~ 5/5(Brightest)
- Max recorded runs: 50 runs
- Recording time
R: 99’59’’99 seconds | TR: approx 3.18 Hr
- Play mode speed
1 x play / pause | 3 x play / pause
1/3 x play / pause | 1 x rewind / pause
- Top temperature range
R: 250 ~ 2,100 °F (100 ~ 1,200 °C)
U: 1 °F (°C)
- Effective temperature range
14 ~ 140 °F (‑10 ~ 60 °C)
- Effective voltage
AC/DC 12V
- Sensor included
EGT Standard: 28-CKTYPE9 (Clamp-on or Weld-on Hardware)
|