LC-2: Digital Wideband "Lambda" O² Controller,part# IN-3877
The LC-2's analog outputs can be used for inputs to Dyno software, gauges or virtually any brand of Data Acquisition hardware, such as:
- Accel,
- Advanced Racing Technologies,
- Advantage Motorsports,
- AiM Sports ( MyChron),
- Altronics,
- Autometer,
- Competition Data Systems,
- CORRSYS-DATRON,
- Corsa Instruments,
- Cygnus Data Star,
- DTA Competition Engine Management Systems,
- Dynamic Test Systems,
- Dynocom,
- DYNOmite (Land & Sea),
- EcuTek,
- Edelbrock Qwik Data,
- EFI Technology,
- Electromotive,
- Engine Management Systems,
- Excalibur Solutions,
- Fuel Air Spark Technology (FAST),
- FXL Data,
- Haltech Engine Management Systems,
- Harrison Engineering,
- Holley,
- HRC,
- Microtech,
- MoTeC,
- Mustang Dynamometer,
- Pi Research,
- Powertrain Control Solutions,
- Powertrain Electronics,
- Race Technology,
- Racepak,
- RPM Performance,
- SPA Technique,
- Stack,
- Stuska Dynamometers,
- Superflow,
- TAT – Messysteme.
The evolution of the world’s most popular stand alone digital O² sensor controller, the Innovate Motorsports LC-2 builds upon the legacy of the LC-1 by adding simplicity and leading edge technology. The LC-2 utilizes the only 100% digital wideband air/fuel ratio technology on the market! The LC-2’s patented award-winning DirectDigital™ signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LC-2’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. The LC-2 includes a digital input/output, 2 full-programmable analog outputs, and is ideal for applications such as dynamometers, data acquisition systems, standalone ECUs, and gauges. The LC-2 can also be "daisy-chained" for cost-effective individual cylinder monitoring, and is fully compatible with our Modular Tuning System (MTS).
Key features include:
- Patented DirectDigital™ Wideband Technology
- Wideband O² Compatible with ALL fuel types
- Ability to calibrate O² sensor for maximum accuracy
- Integrated dual-color status LED (Green/Red)
- *Two configurable linear 0-5v analog outputs
- Optional sensor cable lengths available: 3ft, 8ft (Included), and 18ft
- Positive lock connectors for all connections
- Innovate MTS serial in/out
- Serial connection to your PC
- Real-time display data on screen and/or with powerful LogWorks software
*Two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog Output #1 (Yellow) is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR; Analog Output #2 (Brown) 1.1 volt = 14 AFR and .1 volt = 15 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user.
to view the complete user guide and installation manual.
|
Contact
Us
IN-3877 
3 LBS.
